When creating the airliners “Sever”, as you have already noticed, we pay special attention to the appearance of technology, experiment with new forms and colors, creatively approach the wishes of our Customers. After all, the airplane is the same car, only on the water, which should reflect its appearance with its individuality, status, character, preferences of its owner.
Before we place an order for work, we carefully analyze the wishes of the future owner of the equipment, try to take into account all the nuances that the permanent designer will rely on when designing a unique airplane.
It was with this approach that the original model of the airship with a rigid cabin “Phantom 750K” appeared, the angle of inclination of the windshields in which is executed negative. In addition to the unusual design of this form of the cabin increases the useful space in the cockpit and gives an advantage when driving in rainy weather. All side windows of the cabin are sliding, and on the roof there is a transparent hatch.
The indisputable advantage of the “Phantom 750K” airborne vehicles is an impressive carrying capacity of up to 2 tons and the ability to transport both passengers and bulk cargo. At the same time, loaded boats confidently and boldly pass from the water to the ice, overcome rapids mountain rivers, pass through shallow water. They are easy to manage, they are maneuverable and reliable. A stiff cabin will allow you to comfortably operate this equipment in the harshest climates.
In the cockpit “Phantom 750K” double noise insulation, which additionally absorbs and softens the sound of the engine.
On the “Phantom 750K”, as well as on the “Phantom 650K”, a reinforced, close-fitting door to the cockpit is installed, and the fuel tank fasteners are equipped with belt, eliminating the displacement or deformation of the tank under any load on the aircraft.
Inside the cockpit of this model there is an original and comfortable, with lateral support, front seats for the driver and passenger, light, and very durable. The upholstery of the seats is perforated leather, and the logo of our company is printed on the back of the seats. They are very convenient and practical in operation. Under the seats are metal lockers for oversized hand luggage.
The rear seat is solid, the upholstery is also made of perforated leather. Behind the back of a solid seat is an open capacious locker.
Unlike previous models of “Phantoms”, this airborne cabin with a cabin increased the height of the board in the bow and there appeared hocks, edged with polished frames, for passing fastening lines and mooring ends.
In the “Phantom 750K” booth, additional ZENIT heater deflectors are installed on the console, aimed at the door glass, the Eberspacher Airtronic auxiliary heater, and the location of the stationary TURBOMAX tank inflation pump is provided.
Happy are those people who can afford to combine work and hobbies together. We are one of the few lucky people in the world who have such an opportunity. Our team is a team of like-minded people who are able not only to do the same mechanical work on a daily basis, but rather to get involved in the process of creating technology, to participate in its improvement, to express their ideas and considerations, to introduce them into production and to observe the result.
The design of the boat is a combination of an all-welded aluminum hull, which is a reliable foundation of the ship, and an inflatable body located under it, which in turn is a kind of shock absorber for softening impacts when moving on obstacles protruding from the water or ice hummocks. It is the inflatable body that takes over all the destructive bottom impact loads, absorbs the impact and, after passing through the obstacle, restores its original shape.
The inflatable boat hull is made of high-strength synthetic fabric with a double-sided polymer coating of PVC with the addition of thermoplastic polyurethane. Applied fabric is environmentally safe, wear-resistant, has high climatic and strength characteristics.
The bottom of the boat is protected by polymer scales, which adequately withstand both temperature changes and mechanical impacts. Scales are polymeric plates, each of which is attached with a cord to the bottom of the boat overlapping each other, in general forming a multi-stage protection of inflatable cylinders. When moving along boulders protruding from the water or hummocking ice, each plate is elastically deformed and bends, damping (damping) and evenly distributing the load throughout the bottom of the boat. Each scales, in addition to the protective function, performs the role of a transverse version and ensures high speed performance for the aerodrome.
A bulwark with a loose bar along the entire perimeter is a side protection of the boat. The water on board flows into the scuppers – special barred holes in the aluminum casing. Cylinder pumping valves are located in easily accessible places throughout the boat’s hull.
The rigid welded cabin is an aluminum structure with two frontal, four side and two rear windows, with a door in the middle in front of the cabin. All “Triplex” glasses are tinted with thermal film. The side windows are sliding, the roof has a transparent hatch.
Interior trim as standard – carpet, but any options are possible: leather, wood, etc.
The front loading area has a side of increased height with two pairs of hawks and a guard rail. An electric winch is installed on the nose.
The deck in the cabin and the cargo platform have a non-slip polymer coating.
The standard equipment of the boat includes: two soft chairs to the left and right of the entrance to the cabin, a solid soft seat behind the seats, an all-welded fuel tank with a capacity of 300 liters under the solid seat, a glove compartment in front of the passenger seat, a dashboard with steering column, “Zenit” heaters, heater Eberspacher Airtronic, lights Pro Light, two batteries, electric winch, interior lighting with yacht LED lights.
In the rear part of the aircraft there is a propeller-driven unit, which is a single assembly unit consisting of an aluminum all-welded fence for the screw and a longitudinal-transverse motor tar, on which an engine is fixed using shock-absorbing silent blocks. The engine is equipped with a reduction gearbox, on the flange of which the air screw is fixed. Two vertical keel (steering) controls are located behind the screw. Batteries are installed in front of the fence in special plastic boxes.
You can install one of three engine models to choose from: Phantom 750K: Toyota 1UZ-FE vvt-I – 290 hp, Toyota 3UZ-FE – 300 hp or Toyota 3UR-FE – 388 hp
Toyota 1UZ-FE VVT-i engine: a 32-valve V-shaped 8-cylinder with a volume of 4000 cm³, with an aluminum block of cylinders with an angle of 90 раз, with pressed cast iron sleeves, two aluminum GS, with a DOHC gas distribution system, shafts and the VVT-i system, a two-stage ACIS intake manifold and an electronic ignition system, with separate coils per cylinder. Cooling system – liquid, forced. The timing gear and pumps are a toothed belt. Power 290 hp
The Toyota 3UZ-FE engine, in fact, continues the development of the Toyota 1UZ-FE engine. The 32-valve V-shaped 8-cylinder, with an enlarged up to 4 300 cm³ capacity, also with an aluminum block of cylinders with an angle of 90 раз, with pressed cast-iron sleeves, two modified aluminum SS, two camshafts for each and 4 valves per cylinder . Cooling system – liquid, forced. The timing gear and pumps are a toothed belt. VVT-i gas distribution system, two-stage intake manifold with adjustable length ACIS, electronic throttle and electronic ignition system, with separate coils per cylinder; capacity of 300 hp
The Toyota 3UR-FE engine is a 32-valve V-shaped 8-cylinder with a volume of 5700 cm³, with an aluminum cylinder block, with pressed cast iron sleeves, with two aluminum GS, with a DOHC gas distribution system with Dual VVT-i. Cooling system – liquid, forced. The timing gear and pumps are a toothed belt. Electronic throttle and electronic ignition system, with separate coils per cylinder. Power – 360/388 hp
Drive from the engine to the propeller is carried out through the lowering, single-stage, cylindrical, helical gear reducer. The gear housing is made of high-strength aluminum alloys. The gears undergo chemical-thermal treatment and rolling, have high wear resistance and strength. The connection to the motor shaft is via an elastic coupling that is integral with the flywheel.
1. Inflatable hull of a boat made of high-strength PVC fabric (cylinders and bulwarks)
2.The welded aluminum body of the power plant with a rigid cabin and attachments under the inflatable hull of the boat
4.Weld-welded aluminum protection of the propeller (fence)
5. An air screw of 3 or 6 lobed
6.Vertical control keels
7. Set of protection of the bottom of a polymer material
8. Control panel with steering column and steering wheel
9. On the control panel: the ignition switch, the throttle control handle (gas), the emergency shutdown button with the check, the tumblers of the engine and on-board system control (the switch for switching the heater, the headlights, the navigation lights, the wipers on), the cigarette lighter control of engine systems: a complex instrument with an hour meter and a tachometer, an engine temperature indicator, an engine oil pressure warning lamp, an engine overheating and battery charging, a level indicator Fuel tank, two buttons breakers “weight” engine-indicator LED.
10. Two soft marine seats (driver and passenger), located to the left and right of the door
11.Shield in front of the passenger seat
12. Soft solid seat with a backrest for passengers, designed for 3-4 people
13.Bokovye chests with seats, decomposing into sleeping places
14.Aluminium all-welded fuel tank for 300 liters.
15. Front, side (sliding) and door tinted glass “Triplex”
16. Window wipers for driver and passenger windshields
17. Open front deck and cockpit floor with non-slip polymer coating
18. Soft furnish of cabin elements – carpet
19. Accumulator batteries (2pcs)
21.Liquid heaters “Zenit” (2pcs)
22.Autonomous heater Eberspacher Airtronic
23. Pro lights (2 pcs)
24.Internal interior lighting (boat cover) (4pcs)
25. Transparent hatch.
26.Mirrors of rear view
27. Weight-stroke or pole