North 750K

//North 750K

North 750K

Category:

Description

SPECIFICATIONS

DESCRIPTION

The models of our airboats have a wide range of applications: they are purchased for personal use and for public needs, like fishermen and hunters, as well as nature conservation organizations, both nature lovers and search and rescue services, both for summer and off-season and winter.

The “North 750K” is the Cadillac among the airboats with comfort and functionality at the highest level! A welded aluminum cabin is installed on this model with a double soundproofing and trimmed with carpet, but at the customer’s request it can be trimmed with wood, leather, etc. On the perimeter of the cabin there are tinted sliding windows and a transparent sunroof.

The cabin on this model makes it very warm and comfortable even at -30 ° C weather, since it has two “Zenit” heaters that are permanently installed under the center console at the feet of the driver and the front passenger and a “Webasto” auxiliary heater in the passenger compartment.  

The entrance to the cabin is in the middle.  A spacious passage allows you to bring in bulk things. The front seats for the driver and passenger are separate from each other and are light and comfortable.  In the passenger compartment there are three soft solid seats, which can accommodate 8-9 people.  The largest seat is permanently mounted on the fuel tank and to the left and right of it are 2 more soft seats, which have spacious lockers underneath them, solving the issue of transporting small personal belongings. all the soft seats of the second passenger row will create a full sleeper for 3-4 people.   Over the seat under the ceiling along the entire length of the cabin on both sides are comfortable shelves.  Inside the cabin is illuminated by hour yacht LED lights, working independently of each other. 

The front deck is a two-level deck: the lower open platform with two closed spacious and very functional lockers on the left and right, the upper one is located above the luggage compartments and has guard rails. A winch is installed on the nose. The decks of the cabin and the bow compartment have a non-slip cover, which makes the boat’s movement safe and reliable.

DESIGN

The design of the boat is a combination of an all-welded aluminum hull, which is a reliable foundation of the ship, and an inflatable body located under it, which in turn is a kind of shock absorber for softening impacts when moving on obstacles protruding from the water or ice hummocks. It is the inflatable body that takes over all the destructive bottom impact loads, absorbs the impact and, after passing through the obstacle, restores its original shape.

The inflatable boat hull is made of high-strength synthetic fabric with a double-sided polymer coating of PVC with the addition of thermoplastic polyurethane. Applied fabric is environmentally safe, wear-resistant, has high climatic and strength characteristics.
The bottom of the boat is protected by polymer scales, which adequately withstand both temperature changes and mechanical impacts. Scales are polymeric plates, each of which is attached with a cord to the bottom of the boat overlapping each other, in general forming a multi-stage protection of inflatable cylinders. When moving along boulders protruding from the water or ice, each plate is elastically deformed and bends, damping and evenly distributing the load throughout the bottom of the boat. Each scales, in addition to the protective function, performs the role of a transverse version and ensures high speed performance for the airboat.

A bulwark with a loose bar along the entire perimeter is a side protection of the boat. The water on board flows into the scuppers – special barred holes in the aluminum casing. Cylinder pumping valves are located in easily accessible places throughout the boat’s hull.

In the rear part of the airboat there is a propeller-driven unit, which is a single assembly unit consisting of an aluminum all-welded fence for the screw and a longitudinal-transverse motor tar, on which an engine is fixed using shock-absorbing silent blocks. The engine is equipped with a reduction gearbox, on the flange of which the air screw is fixed. Two vertical keel (steering) controls are located behind the screw. Batteries are installed in front of the fence in special plastic boxes.

ENGINE

The “North 750” airboat has a Chevrolet LS-3 Engine .

Power : 430 hp

Volume: 6200 cm3

Maximum Speed: Up to 100/150 km/h

Fuel Consumption: 35-90 l/h

Reducer

Drive from the engine to the propeller is carried out through the lowering, single-stage, cylindrical, helical gear reducer. The gear housing is made of high-strength aluminum alloys. The gears undergo chemical-thermal treatment and rolling, have high wear resistance and strength. The connection to the motor shaft is via an elastic coupling that is integral with the flywheel.

EQUIPMENT

1. Inflatable hull of a boat made of high-strength PVC fabric (cylinders and bulwarks)

2.The welded aluminum body of the power plant with a rigid cabin and attachments under the inflatable hull of the boat

3.Transfer motor

4.Weld-welded aluminum protection of the propeller (fence)

5. An air screw of 3 or 6 lobed

6.Vertical control keels

7. Set of protection of the bottom of a polymer material

8. Control panel with steering column and steering wheel

9. On the control panel: the ignition switch, the throttle control handle (gas), the emergency shutdown button with the check, the tumblers of the engine and on-board system control (the switch for switching the heater, the headlights, the navigation lights, the wipers on), the cigarette lighter control of engine systems: a complex instrument with an hour meter and a tachometer, an engine temperature indicator, an engine oil pressure warning lamp, an engine overheating and battery charging, a level indicator Fuel tank, two buttons breakers “weight” engine-indicator LED.

10. Two soft marine seats (driver and passenger), located to the left and right of the door

11.Shield in front of the passenger seat

12. Soft solid seat with a backrest for passengers, designed for 3-4 people

13.Bokovye chests with seats, decomposing into sleeping places

14.Aluminievy all-welded fuel tank for 280 liters.

15. Front, side (sliding) and door tinted glass “Triplex”

16. Window wipers for driver and passenger windshields

17. Open front deck and cockpit floor with non-slip polymer coating

18.Perned closed lockers of the nasal compartment

19. Soft furnish of cabins – carpet

20. Accumulator batteries (2pcs)

21.Hockey lights

22. Liquid heaters “Zenit” (2pcs)

23.Autonomous heater Eberspacher Airtronic

24. Pro lights (2 pcs)

25.Internal interior lighting (yacht LED lights) (4pcs)

26. A transparent hatch.

27.Mirrors of rear view

28.Vneslo-strokes or poles

Reviews

There are no reviews yet.

Be the first to review “North 750K”

Your email address will not be published. Required fields are marked *